Coaxial Cable Stripping
PRODUCT GROUP
instructions:
1.push the cassette out of the housing ,push from the front of thr cassette
2.cassette is reversible one side is available for rg59/6 and another side is for rg7/11
3.for stripping coaxial cable
a.insert the cablr until it aligns with the cable guie
b.insert your index finger into the stirpper's finger ring rotate the stripper by counter clockwise 3-5 times the cable insulation is cut while you are turning the stripper
e. open the jaws and remove the cable .pull away the out jacket and dielectric to expose the inner conductor
d.strpping distance is designed for 6mm for each dielectric and iner conduct
4.for stripping round netwarking cable
a.insert the cable into the second stripping hole rotate 1-3 times at counter clockwise and then open thr jaw and remove the outer jacket
b.the black color adjusting knod is for adjusting the blade's depth ,turn clockise for increasing the blale's depth and counter colkwise for reducing the depth
5.for cutting coaxial cable round networking cable or flat telephone cable,place the cable in position and then squeeze the handles
6.for stripping flat cable cable insert the cable between the stripper blades squeeze handles cable must be kept perpendicular and then handles
a.instert 4p/6p cable into the two-bladed side of the tool'sstriper until it touches the stop guie
b.insert 8p cable into the two-bladed sideof the tools stripper and let it extend alittle past the lower cut blade
PRODUCT SPECIFICATIO
Characteristic impedance | 50Ω 75Ω | Temperature range | -40~+85°C |
Frequency range | DC~11GHz(50Ω) | Working Voltage | ≤330 VRMS |
DC~1GHz (75Ω) | |
Contact Resistance | Center Conductor | ≤10 mΩ |
Outer Conductor | ≤4 mΩ |
Insulation Resistance | ≥ 10000 MΩ | Insertion Loss | ≤0.24dB(6GHz) |
Durability | Mating cycles | ≥500 |
Dielectric Withstanding Voltage | ≥2500 VRMS |
Vibration | 100m/s (10-500Hz), 10g | |
VSWR | Straight | ≤ 1.25 |
Right Angle | ≤ 1.35 |
| Parts Name | Material | Plating |
Material And Plating | Pin Contact | Brass | Gold plated |
Socket Contact | Beryllium or tin bronze | Gold plated |
Resilient Contact | Beryllium-copper | Gold plated |
Insulator | PTFE | — |
Crimp Ferrule | Copper alloy | Nickel or gold plated |
O-ring Sealing | 6146 silicon rubber | — |
OUR SERVICE
1. Your inquiry will be replied within 24 hours.
2. Our delivery time is 15 days, we will contact if there are special circumstances.
3. OEM&ODM.
4. We can do the product from your drawing, sample or indicated details.
FAQ
Q:Are you a manufacturer or a trading company?
A: We have been professional antenna manufacturer for 20years.
Q:Where is your factory located? Can I visit your factory?
A: Factory address:Room 1618,sansheng Office Yangzhou City,Jiangsu,China.just call us ,we will pick you up with no delay
Q: What's your company MOQ?
A: our company don't have MOQ. We also accept small quantity.
Q: Can your company accept customize?
A: Welcome OEM & ODM.
Q: What's your delivery time?
A:If our company have stock ,will send to you within one day once receive your deposit.
If use customer brands, we will take a 3-5 working days to prepare materials and mass production.
Q: Can you send a sample for us to test ?
A: Yes, we can. Sample can send out once you ask for it, if the samples cost is very higher ,we will ask a sample fee. At the same time . the Sample fee will return back in future order. If the samples cost is lower, we can send to you free , but you also take the shipping cost.