Instruction:

1.Push the cassette out of the housing, push from the front of the cassette.

2.Cassette is reversible, one side is available for RG-59/6 and another side is for RG7/11.

3.For stripping coaxial cable:

  a. Insert the cable until it aligns with the cable guide.
  b. Insert your index finger into the stripper by counter clockwise 3-5 times.

The cable insulation is cut while you are turning the stripper.

  c. Open the jaws and remove the cable. Pull away the outer jacket and dielectric to expose the inner conductor.

  d. Stripping distance is designed for 6mm, for each dielectric and inner conduct.

4.For stripping round networking cable.

  a. Insert the cable into the second stripping hole, rotate 1-3 times at counter clockwise, and then open the jaw and remove the outer jacket.

  b. The black color adjusting knob is for adjusting the blade’s depth. Turn clockwise for increasing the blade’s depth and counter clockwise for reducing the depth.

5.For cutting coaxial cable, round networking cable or flat telephone cable, place the cable in position and then squeeze the handles.

6.For stripping flat cable, insert the cable between the stripper blades. Squeeze handles, Cable must be kept perpendicular and then pull from the tool.

Our company has been in radio frequency coaxial connectors area for 12 years.There are more

than 150 employees in our factory, 10 % of them are engineers and technicians. We are

professional for designing, developing, producing and sales.

According to the national and professional standards(GB&JS), we produce all kinds of RF coaxial

connector including SMA, SMB, SMC, BNC, TNC, N, 7/16(L29), 1.6/5.6(L9),MCX, MMCX, SSMA,

SSMB, SSMC, SMZ, MC CARD(C2), 1.0/2.3(CC4), FME, UHF, MINI UHF, F, RCA, TAC and

antenna, cable-package, audio and video connector, big specification connector of feeder line.

We also do all kinds of adapter, impedance converter, fixed attenuator, termination loading, arrester.